Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing plumbing stopper
[ 1 Answers ]
I am having a problem with reinstalling stopper on a vanity sink, It is an old sink that has a pivot rod centered in middle of drain pipe
Installing a air vent for plumbing.
[ 1 Answers ]
Thank you for your advise it has been great!! Question, when installing new plumbing, putting in the air vent from the drain pipe. The piece that protrudes through the roof, can this be PVC or does it have to be something else. Also how much should stick out above the roof. We have snow in...
Installing a new bath above (and below) existing plumbing
[ 1 Answers ]
Hello all, A quick explanation of my situation: I have a one bath condo, and would like to build a half bath over the existing bathroom. Unfortunately, there is a big plaster "box" sticking out of the ceiling right above where I'd like to build that half bath, lowering the ceiling height to...
Toiler odor
[ 5 Answers ]
Recently I've noticed a strong septic odor emanating from the toilet in my basement bathroom. It appears that the odor, regardless of how clean the toilet is, fails to go away. Could this be a problem in the pipes? I have never had a problem w/clogging etc. I have a shower in the same bathroom...
Replace shower Plumbing Valve assembly shower head 2 knobs
[ 3 Answers ]
In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that... View more questions Search
|