Ask Experts Questions for FREE Help !
Ask
    postie's Avatar
    postie Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 1, 2009, 11:24 AM
    My furnace won't fire up
    I have a Keeprite SP 80 High Efficiency model # NUG5075BFB2 the pilot is lit but the furnace won't fire the thermostat( new batteries) is set for 70. The filter is clean, I tried turning everything off including the gas and the thermostat then turned everything back on the pilot is on but the furnace won't fire. Any suggestions
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 1, 2009, 01:23 PM
    Make sure the power is turned on at the furnace and in the main house electrical panel. If so then test for 24 volts at the transformer.
    postie's Avatar
    postie Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 1, 2009, 03:58 PM

    The blower fan has power but I'm not sure what or where the transformer is or what it looks like
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Dec 1, 2009, 10:01 PM
    I feel you might be in overhead especially since you have no idea what a transformer is making your effort to repair your furnace rather futile along with the fact that you could be hurt in the process. I recommend you call a proofessional for on site service and repair.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace does not fire up [ 1 Answers ]

I have a gas furnace... when I will hear a clicking sound when the furnace is ready to fire up but it doesn't I see the pilot light go on but the blower does not not go on either... on the auto setting... On the fan on setting the blower fan will go on,, the burner clicks but will not fire...

Gas Furnace won't fire [ 5 Answers ]

We've had this problem for several years and HVAC service men can't find the problem. Occasionally, (4 times in the past 2 years) our furnace turns on but the burners won't fire. If we shut the furnace off (at the thermostat) and leave it off for 1 hour and turn it on, the furnace works fine. All 4...

Furnace will not fire. [ 1 Answers ]

I have a Amana Air Command 80 Model GHI. I heard the vent blower motor start up but no follow-up ignitor action. The ignitor was found to have a crack in it. The furnace never did shut itself off. Suggestions would be appreciated.

Furnace will not fire [ 15 Answers ]

I took the cover off and noticed the red light was blinking 2 times is there any way I can fix this myself or do I need to call someone

Furnace will not fire [ 1 Answers ]

I have a comfortmaker GNJ075n12a1 80% furnace installed in 96 the igniter come on and the blower comes on and the system cycles a couple of times before the control locksout on during this time the gas valve is not energizing to fire the furnace if you shut the system down for a couple of...

View more questions Search