Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water heater wiring
[ 2 Answers ]
I have an electric hot water heater. It was disconnected by some one that didn't label the wires. Coming out of the water there is a black, red and a screw for the ground. The wire coming from the wall has a white, red, black, and bare copper (ground). I need to know how to connect the wires. The...
Hot water heater wiring
[ 3 Answers ]
I am replacing my hot water heater with one almost identical to the old one.The old one had a black and a red and a ground wire. The new one is the same. They are both 50 gal electric. The new one trips the breaker(basically it won't even let it engage). I assume my water heater is bad. It is a...
Wiring water heater
[ 5 Answers ]
Changing fron a gas to an electric water heater. Question is once I run the 220 line from the service panel to the water heater location how do you get it to the water heater. Do you mount some sort of juction box on the wall and then run a line to the tank ? Can't imagine that you just run a...
Wiring a hot water heater
[ 4 Answers ]
I'm installing a hot water heater at the cottage, there is a 240 circuit already in place that was wired for a dryer - so it has black, red, white and bare copper. The water heater has the standard black, red and green for 240v. I know the dryer wire black and red are hot and on the water heater...
Wiring up a hot water heater
[ 3 Answers ]
How do you wire up a hot water heater if the wires from the water heater are red and black and the wires from the wall are black and white? View more questions Search
|