Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
92 ford ranger
[ 1 Answers ]
Do I need a scan tool to clear check engine light on a 92 ford ranger 2.3 liter after its been fixed or is there another trick?
Ford Ranger noise .high pitched whine/hum
[ 10 Answers ]
Just bought my first Ranger today. A 2006 2WD XLT Automatic 5-speed with overdrive and cruise control. Has under 19 K miles. Looks spanking brand new; not a scratch or dent and beautifully detailed. However... ( ! ), I notice a high pitched whine or hum at hiway speed (well, above 30 mph) which...
Ford ranger 2.3
[ 1 Answers ]
Does the harmonic balancer need to be removed to install a new timing belt on a 4 cyl. Ford motor 2.3 1995
Ford Ranger
[ 1 Answers ]
2001 Ranger. I found dangling down from left side rear a hose with a cilp. It was attached to the axle housing. What is it for and where does it go. It just appears to be some type of air hose but is not attached to anything at other end. Should I be concerned? Thanks
92 Ford Ranger 2.3L
[ 1 Answers ]
Anyone, what problems does the Check Engine light going on usually indicate? I was coming home tonight, about an hour highway drive and the light momentarily came on, then off, on and off. Not a flicker, but for several minutes at a time. Truck is VERy reliable and there is no indication that... View more questions Search
|