 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Tappan Furnace Fuses
I have a Tappan Furnace. I just replaced the circuit board and I am getting no power at all-no lights coming on. I do have cover replaced and I do have power on. Is there a fuse other than the circuit board fuse that might need tobe replaced? If so where do I loacate it?
Thanks |
||||
Check out some similar questions!
Central Air - Goodman Furnace - Tappan Thermostat - Robertshaw (Programmable) I keep blowing a 3 Amp fuse that is located on a computer board inside of my furnace panel when turning on the Central Air unit. I've replaced the fuse and was able to run the furnace and the blowing fan just fine,...
On a Frigidaire, Tappan range, Mod#30-2242-00/01 ser#V52140756 See picture Part Detail The tops of the burners are loose - you can spin them on the base. Flame is coming out the gap between the top and the base and not all ports on top are emitting flame. Those that have flame are blue and...
Tappan Furnace Problem Last season I had a Tappan furnace installed in my shore home.. during the winter I set the temp at 55 when I'm not there & when I come down I set it at 70... the furnace kicks off around 62 & I need to reset the system. The contractor has replaced the reset buttons &...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
