Ask Experts Questions for FREE Help !
Ask
    mack048's Avatar
    mack048 Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Nov 24, 2009, 10:53 AM
    Low water cutoff continuously asks for water
    I have a steam system boiler with an automatic water feed, I have flushed the boiler and let it fill up with water on its own after that the low water cutoff would ask for water every time I cut the boiler off and bac on causing too much water to be in the boiler when I allow the heat to remain on for a long period sieam and water would come out from the pressure release pipe. Can you tell me why tjis is occurring.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Nov 24, 2009, 01:18 PM
    Dirty or faulty hydrosensor, most likely.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low cold water pressure throughout the house [ 3 Answers ]

What would cause me to have low cold water pressure throughout the entire house but the hot is fine? And how can I fix it?

Low water pressure [ 2 Answers ]

I have a well that supplies are water we put a filter on the line that comes into the house and hot water heater the pressure is very low you cannot run a washing machine or flush the toilet while showering or using another faucette in the house the water then drips out is the filter causing this?...

Low hot/cold water pressure with well? [ 0 Answers ]

Hi, I have a small house with a well. In recent weeks the water pressure to the house has dropped substantially. This is true for both the hot and cold water, and occurs at all taps faucets etc. At this point if you turn on a fuacet in one part of the house water flow to other facilities, shower,...

Low boy water heaters [ 0 Answers ]

I am looking for a low boy natural gas water heater for my crawl space do they exist? I currently have a 28" tall low boy

Distance between water cutoff valve and washer [ 4 Answers ]

Hi, I want to install my washing machine water valve on the side of my washing machine so I can stack the washer and dryer and still have access to the valve. The installation instructions that come with the valve ( standard Watts 1/2" dual ball valve) say that the valve should be 3" above the...

View more questions Search