[svgmi]

Once I've removed the shower handle and temperature control lever how do I remove the mixer valve that is inserted in the pipe? I would assume it pulls right out but it has been in for over 10 years and seem very tieght.

[ballengerb1]

Do you mean the cartrdige inside the valve body or are you trying to totally remove the entire valve from the supply lines?

[svgmi]

I want to remove the replaceable cartridge, that connects into the supply line?

Thanks

[ballengerb1]

Each manufacturer is different but basically they enploy a clip that must be removed before you can pull the cartridge. Even with the clip out some will need a cartridge puller. Do you know the brand of the valve? Here is a picture of a Moen valve, the brass clip sticks up from the valve. http://www.moencartridge.com/Moen11.jpg

[svgmi]

It not a Moen, not sure of brand but unit appears to be white plastic. It does have two small holed (one on each side) that appear a tool could be used to pull. Would home Depot have a puller tool?

[ballengerb1]

Yes they would but some pullers are propritory and only work with that brand. You need to know what you have before we start buying a puller, it may not be needed. Can you post a picture?

[svgmi]

Not right now but can later. I'd guess the unit is a Delta.

Thanks

[ballengerb1]

Does it look like any of these Delta faucet replacement cartridge Plumbing Supplies at BizRate - Shop online for Home & Garden. Compare Prices and Read Consumer Reviews This may help too http://www.deltafaucet.com/customers...tml?tab=repair

[svgmi]

Can't find it here. I'll stop by hardware store and get data on type, and get back with you. Thanks for you help so far!!