Ask Experts Questions for FREE Help !
Ask
    generator's Avatar
    generator Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 21, 2009, 11:49 AM
    Valve adjutment
    I need to adjust the valves on my 15 hp briggs and stratton generator. Can someone explain how?
    KUXJ's Avatar
    KUXJ Posts: 975, Reputation: 97
    Senior Member
    		  
    #2

    Nov 21, 2009, 12:08 PM
    Hi! generator, welcome to AMHD :)

    If yours is an OHV your in luck, see:
    YouTube - Lawn Mower Repair Valve Adjustment
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Difference between steam valve and hot water valve [ 1 Answers ]

We are in the process of changing our small steam heated library to hot water heating on an extremely limited budget. Three of the existing zones are not presently being used but our heating engineer suggests changing out the existing pneumatic actuated steam valves to pneumatic actuated hot water...

Taking off a push connet valve (toilet valve) [ 9 Answers ]

We need to take off our 20 yr plus push connect valve (grey plastic toilet valve) and put a new metal one in to repair the leak in our toilet connecter ( grey tubing also) Chances are the wall stem is made of grey tubing or copper. We bought a new metal push connect valve and toilet connecter. ...

No Shut Off Valve between water heater and bathroom sink valve [ 14 Answers ]

I have a constant drip in my bathroom sink. After a little trouble shooting, I came to the conclusion that my hot water valve underneath the sink is the culprit. I traced the pipe down the wall, into the basement and to the water heater. The only thing between the water heater and the old valve in...

Stuck middle valve - 3 handle shower valve [ 3 Answers ]

Help and suggestions!! The middle handle, used to divert water from the tub spout to shower head is stuck in the 'tub' position. I have removed the handle and trim bezel and tried to turn the shaft with pliers - no luck & quit before marring the splines on the brass shaft. What now??

Water Pressure Valve and Ball Valve [ 1 Answers ]

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.

View more questions Search