Ask Experts Questions for FREE Help !
Ask
    quantaquandry's Avatar
    quantaquandry Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 15, 2009, 02:46 PM
    GE washer does not agitate
    GE S3700G2WW 6 months old. Does not agitate or spin. Pump runs OK. Belt and motor appear OK. How do I check the lid switch to see if it is bad? Or could there be another problem?
    quantaquandry's Avatar
    quantaquandry Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Nov 20, 2009, 06:21 PM
    I took the cover off the controls and found a wiring diagram and guide. It explained that there is an indicator light above the motor that provides diagnostic messages. The blinks confirmed that the problem was the lid switch. I am replacing it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washer does not agitate [ 1 Answers ]

My lsr8233e washer does not agitate in either the wash or the spin cycles

Washer will not agitate [ 1 Answers ]

Washer will not agitate

GE Washer won't spin or agitate [ 1 Answers ]

I have a GE washer model #SE4210. It will not spin or agitate. It will not even spin when I try to spin it manually. I removed the panel off the front and noticed black dust below the motor. Apparently the belt has been slipping and luckily I haven't burned up the motor yet. What can I do to...

GE Washer won't agitate [ 4 Answers ]

I have a GE washer Model# GDSR4110T6WW that won't agitate. It fills with water. Then when the agitating starts, the motor kind of sounds like its turning on and off. The agitator moves about an inch back and forth. I can move the dial to the drain/spin cycle and that works fine. Any ideas?

View more questions Search