 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool won't spin
Can someone please help, My Whirlpool Ultimate Care II washer won't spin. It agitates and drains fine. I took it apart and jumped the lid switch, still same problem. I looked underneath in the spin cycle and the silver cup disc atop the transmission spins. I can see between the silver clutch and the drive module and the plastic clutch lever isn't spinning which is why the basket won't spin. Some say it's the transmission but I can see that it spins, also the silver clutch cup gets pretty hot. I don't think it's the transmission. I can be reached at [email protected]. Thanks in advance.
|
||||
Check out some similar questions!
Today, my washer decided to stop spinning. I don't know if she has gotten dizzy over the last 3 years or what, but she quit. I noticed it when the rinse cycle was to start and the noise of the machine changed a bit. When I peeked under the lid, the drum was not moving, but the motor sounded like it...
Hello. I have a LEW0050PQ# Dryer that heats up, but will not spin. I know it is actually a eurotech model # EDV278ELGH. Please help. Thanks, Chris
My whirlpool dryer will not spin please help
The washer tries to spin but only makes a loud rapid clicking sound. The motor coupler is OK. I replaced the clutch which was badly worn but no improvement. I am now trying to remove the basket following the Whirlpool manual but after removing the spanner nut the tub will not lift. I have tried...
Whirlpool Gold gsq9364hqo doesn't always spin on the spin cycle. The motor runs but the basket doesn't spin. If I lift the lid the motor stops, then something (clutch or pawl?) catches and if I put the lid back down than it starts spinning correctly every time. Any ideas?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
