Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installed GFCI outlet-Not working- Only works when Reset Pressed
[ 5 Answers ]
Hi All, Hopefully this is an easy fix. I updated all my outlets in my kitchen but I can't get my GFCI outlet to work. It was already connected to a white GFCI outlet and I installed a black one. It had two pairs of wires and the ground. Apparently it controls the other outlet close by. After I...
Three outlets dead in a circuit, where the light right before the first outlet works
[ 9 Answers ]
Recently discovered the refrigerator/freezer lights off after using an electric tea maker plugged into the outlet three feet above the one where the fridge is plugged in. I have replaced the breaker and all three outlets in the circuit, and still no outlets work. What could be up here?
New outlet from switch
[ 1 Answers ]
I need to run a new wall outlet directly below a 4 switch wall switch. One switch controls an adjacent outlet, and I'd like that switch to also control the new outlet. Currently, that switch has a black and red wire. How do I wire this?
Switch a 220 v outlet to a 120 v outlet
[ 1 Answers ]
I just got an emergency generator and it has a 220 v plug, I will not be using a 220 appliance and would like additional 120 outlets. It seems that I should be able to split the 220 into two 120 outlets. If so how to do it.
Outlet under sink only works with disposal?
[ 5 Answers ]
I have two (standard?) outlets under my kitchen sink (brand new apartment building). The garbage disposal is plugged into one of them, and works fine. Switching outlets is fine, too. The disposer works in each. However, no other appliance works in either of the two outlets. I have tried a... View more questions Search
|