Ask Experts Questions for FREE Help !
Ask
    spouseofpastor's Avatar
    spouseofpastor Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2009, 01:34 PM
    L110 bent belt pulley shaft
    I have a john deere L110 that is about 6 years old. I have a bent belt pulley shaft . I need information as to removal so I can replace it.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 19, 2009, 01:49 PM

    Usually the entire mandrel comes out with 4 bolts or screws, not hard if you have removed the deck. Carefully inspect the deck to make sure it is still flat.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Nov 19, 2009, 04:55 PM

    Hi,
    You will find as a mandrel unit #GY20785 and you may be wise to get the bolts #GX20234 as they often break off instead of loosening.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears 18HP Tractor Pulley/Transaxle Belt Adjustment [ 2 Answers ]

I have a Sears Craftsman GT 18HP 6 Speed Garden Tractor, 44" Deck, Model # 917.255919. Here's my problem... when I push in the Clutch/Brake Pedal, the belt that goes from the engine (around the engine pulley) to the transaxle keeps turning. The large pulley on the transaxle stops, and the belt...

John Deere L110 belt diagram [ 2 Answers ]

Could someone with access to this belt diagram share a copy? I haven't been able to track it down.

How to put the drive belt back on the pulley [ 2 Answers ]

I have a craftsman 18.5 lawn tractor and the drive belt has slipped off the rear pulley. How do I get it back on?

Dryer Belt broke and belt tension pulley fell out. Where does it go? [ 1 Answers ]

When the dryer belt broke, the belt pulley fell to the bottom of the dryer. I can't find where to put it back. The dryer is 25 years old. I don't want to pay for a service call. Is there a manual on line?

View more questions Search