Ask Experts Questions for FREE Help !
Ask
    John C Niro1951's Avatar
    John C Niro1951 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2009, 04:18 PM
    Mount a toilet
    Replace toilet bowl flange
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Nov 17, 2009, 04:58 PM
    What are we working with here? PVC,ABS or cast iron? Why do you want to replace it? If the slot's broken they do make a repair kit for that. Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wet mount and dry mount preparation [ 1 Answers ]

What is the advantage of using wet mount preparation instead of dry mount preparation?

How to mount a wall mount pot filler [ 3 Answers ]

I was thinking about installing a wall mounted pot filler in our kitchen. What type of fitting and mounting does this require. I am using ½” copper to a thread male. I will secure the pipe to the stud. Is this correct. How far out does the thread need to stick out of the wall.

Wall Mount toilet relocation [ 7 Answers ]

I have a wall mounted toilet that I would like to relocate, it will be on the same wall, just on the opposite end of the room. Any suggestions on how to do this? House was built in 1970 and bath is main bath on 2nd floor.

Toilet Mount [ 4 Answers ]

I could not get my toilet unstopped. I removed the toilet and found I had subtanial root growth where it had broken the flange that the toilet mounts too. How can I replace the mount flange? I put some root cristals in the pipe while I figured out the repair.

PVC toilet mount and flange replacement on slab [ 3 Answers ]

Hi. I'm a new home owner and an idiot. I discovered that our toilet on the first floor (no basement) was rocking back and forth, and upon attempting to tighten down bolts, further discovered that they spun freely. I removed the toilet to find that both slots of the pvc mount were broken. ...

View more questions Search