Ask Experts Questions for FREE Help !
Ask
    lulumann's Avatar
    lulumann Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2009, 12:18 PM
    To buy a Carrier 2 stage or 3 stage?
    I need to replace my Furance for a 1500 sq. ft. home in Ontario.
    My question is : should I go with a Carrier 58MVB060 2 stage? Or a 58MVC060 3 stage?

    Thank you for your help!
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Nov 6, 2009, 07:37 PM
    they both are 2 stage heating system and good at that. The 58mvc model is the infinity 95% afue, and the 58mvb is the variable speed 96% afue. They both are good, but I like the capability of the mvc model.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #3

    Nov 6, 2009, 09:08 PM
    The Infinity/Evolution control is the most versatile & user-friendly I have seen yet. I have one (Evolution) in my home and really dig it. Just make sure you choose an installation contractor with a good reputation, who really knows what they are doing.
    lulumann's Avatar
    lulumann Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Nov 16, 2009, 05:49 PM
    Thanks for your answers.

    I most likely with go with the 3 stages.

    With Mette
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wire conversion for 2-stage heat/1-stage cool thermostat [ 1 Answers ]

What is the conversion for wire connections from a Lennox to a White-Rodgers 1F72-151. The old connections were: G, W1, W2, Rc, Rh, Y1 and Y2. The new connections are: W2, E, O/B ,R ,L ,G, C and Y

Benefits of two stage vs single stage heat pump [ 1 Answers ]

I'm replacing a 20 year old Lennox two stage heat pump. Live in northwest Florida panhandle. 2400 sq foot single story home. One AC tech suggested not using a two stage replacement unit because of cost. What are advantages of two stage over single and what should I consider in choosing...

Hvac1000: Or ing stage relays (multi-stage stats to single stage) [ 1 Answers ]

Would you agree that you can and should OR the outputs of say a 2 stage heating stat to make it a single stage? OR means connect the outputs together. Example: Connect W and W2 to create a single stage stat. I'm under the impression that either W1 or W2 is activated and not both and that this...

White rogers thermostat 2 stage heat 1 stage cool [ 6 Answers ]

Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused:

White rogers thermostat 2 stage heat 1 stage cool [ 1 Answers ]

What is the right wiring to hook the WHITE ROGERS 80 SERIES thermostat up ( 1F82-261)? I have a outdoor wood burner dlowing hear to a exchanger in the ducts , and I have propand gas as a back up sorce The furnace is a coleman evecon ( 94 model) with ac (up draft) I think I had the wiring...

View more questions Search