Ask Experts Questions for FREE Help !
Ask
    djekich's Avatar
    djekich Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 14, 2009, 05:28 PM
    Air Compressor
    What gauge wire should I use for my 240 volt 18 amp air compressor
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Nov 15, 2009, 06:57 AM
    I am not going down this path again.

    Please provide the make and model number of the unit

    Review this thread for additional information on air compressors, and you will see why I am asking for complete, accurate details.

    https://www.askmehelpdesk.com/electr...gs-291599.html

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Jenn-Air Range [ 2 Answers ]

Just moved into a house with a Jenn-Air E33658 slide in range. Do you know where and can get/download a user's manual so I can use it to it's fullest potential and a source for parts to replace a couple of missing knobs. Thanks

Air Handler fan [ 5 Answers ]

I have a TRANE model TWE040E130A1. The air handler motor will not run. It tries to start but sits there and rotates back and forth a couple of times and stops. It will repeat this cycle several times and then just stop. I have tried to assist the fan by spinning it in the direction of rotation with...

Heating air comes out from only one vent [ 6 Answers ]

Each bedroom has two vents, only ONE vent from each bedroom comes out hot air. There is no valve control at the main pipe.

Cold Air Return Vent [ 1 Answers ]

I have a gas furnace that has a vent coming from outside and is spliced into the cold air return. What is the purpose of this? Does the cold air affect the efficiency of the furnace? Can I remove it or does it need to stay in place?

Amana air conditioning compressor fan runs but compressor does not [ 9 Answers ]

I have an Amana Model RCE30A2B Compressor unit installed it is about 6 years old, the compressor will not cut in when demanded yet the cooling fan for the unit does


View more questions Search