Ask Experts Questions for FREE Help !
Ask
    budd1997's Avatar
    budd1997 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 13, 2009, 02:38 PM
    Bryant furnace model 376cav, error code 24.
    I am getting error code 24 on my bryant furnace.
    Could someone please help me by letting me know what the code is, and how to fix it?
    I was trying to install a new thermostat and might have got wires crossed.
    Thanks
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Nov 13, 2009, 05:09 PM
    You have blown the low voltage fuse on the control board. (Simple automotive fuse)
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #3

    Nov 13, 2009, 05:23 PM

    If they are getting a fault code, I doubt the fuse is blown
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #4

    Nov 13, 2009, 08:49 PM
    On the newer systems(under 15 years old). The system will let you know if 24 volts has been broken, from roll out limits, main limits, draft limits and open low voltage fuse. Count the blinks of the light on the control board. Look on the door of the furnace for the led code status it's a service code to let you know what's wrong.
    kjc0705's Avatar
    kjc0705 Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Feb 20, 2010, 12:39 PM
    Quote Originally Posted by T-Top View Post
    you have blown the low voltage fuse on the control board. (Simple automotive fuse)
    You were right on, I just ran into the same problem, code 24, it was a 3 amp automotive fuse on the control pannel. Thanks for the answer!
    Damageddino's Avatar
    Damageddino Posts: 2, Reputation: 1
    New Member
    		  
    #6

    Nov 25, 2010, 09:32 AM
    I Posted a question and found the answer here, Just a simple 3 amp fuse. Saved a ton,pack of fuses $4, instead of making a service call.
    Thanks

    Happy Thanksgiving
    Danmackinnon's Avatar
    Danmackinnon Posts: 1, Reputation: 1
    New Member
    		  
    #7

    Dec 4, 2010, 09:52 PM
    I've encountered the same problem and have purchases the fuse but, can't find out where the heck it goes. Please advise. Thanks.
    Richardnewmed's Avatar
    Richardnewmed Posts: 1, Reputation: 1
    New Member
    		  
    #8

    Jan 6, 2014, 01:09 PM
    3 Amp automotive type two-prong Fuse is on the circuit board. Buy a nice screwdriver-type 1/4" socket and remove the four 1/4" screws holding the whole circuit board. Remove the sheet metal container with the circuit board. Disassemble tin and replace the fuse.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Plus 80 Error code 33 [ 3 Answers ]

Hello! I'm new on here so bear with me. I found a similuar post on the Bryant 80 but I believe I have a different model... not sure how much that matters. The only model number I could find on the unit was CK5AXA036017AAAA The Error code is 33 Limit or flame roll out switch is open. The furnace...

Bryant Model 330AAV code 43 [ 1 Answers ]

I have a Bryant Model 330AAV Upflow- the flashing indicator lights say it could be a Pressure switch, Draft safeguard switch stuck, or low heat pressure. How do I determine what the problem is?

Bryant plus 80t error code 31 [ 7 Answers ]

Ok, the furnace stopped working this morning. Need some help. The flame goes on, but turns off after a minute. The LED flashing code on the motherboard says 3-1 (31 - which is the high heat pressure switch -- also says to refer to error code 32 which is the low heat pressure switch). I turned the...

Bryant plus 80 error code 31 [ 1 Answers ]

Bryant Plus 80 furnace - Error code 31 What are the corrective measures to put this furnace back to producing heat? There is power, the fan works but there is no heat. We lost power recently but it worked after that. Last evening there were high winds which were indicated on the code...

What are the Bryant 373LAV/376CAV Error Codes? [ 3 Answers ]

I have a Bryant 373LAV/376CAV Gas Furnace. I started having a problem with it and can't find the FLASHING LED ERROR CODES anywhere. After reading some of the answer in these forums I'm assuming the LED flashes x times short, then x times long for a 2 digit number. I'm getting a 3 short 3 long...

View more questions Search