Ask Experts Questions for FREE Help !
Ask
    cooter1335's Avatar
    cooter1335 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 9, 2009, 07:02 PM
    Old Sears floor furnace parts
    Does anyone know a source for parts and information on servicing for a 48 yr. old Sears floor furnace? The sears website was no help.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 9, 2009, 09:53 PM
    Many operating parts like gas valves/pilots/thermocouples/milivolt generators/safety limit controls can be replaced with over the counter style parts. These parts might look different or have a different part number but will function just like the original. Your best bet on these parts are to visit a Grainger or a HVAC parts supply house. These parts will need to be matched up to the originals for operating voltage and setting like temperature Etc.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Repair parts for sears table saw 11327520 [ 2 Answers ]

Two questions, what is the housing that sets up on top of the motor (with the toggle switch) underneath called? Where can you get replacement parts for older Sears table saws?

Looking for parts for very old floor furnace [ 3 Answers ]

Hello I have a very old Sears model floor furnace that needs the 2 thermostats (part of the furnace not the one on the wall) replaced. Any ideas where I can find them?

Insulating 'Sears' type house Floor/wall/attic [ 1 Answers ]

I am planning renovations for my house which I am told is a 1948 'Sears' type house 1.5 stories, original wood siding, now with metal siding. Thick plaster walls with no insulation. Attic has insulation up to the top of joist. Floors have no insulation. Floors are cold on feet. Duct work only...

Old Sears furnace [ 1 Answers ]

We have an older(at least 20 years that we know of) Sears series 600 furnace. Recently the blower started coming on for 10 to 15 seconds than shutting off. After 3 or 4 times of doing this furnace will run through a normal cycle. Also ,sometimes the blower will come on as soon as the burner lights...

View more questions Search