Ask Experts Questions for FREE Help !
Ask
    rai8302's Avatar
    rai8302 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2009, 03:24 PM
    Hampton Bay UC7083T Remote No More
    I have a ceiling fan that until today has worked quite well with the remote. The LED light on the remote does not light up even after replacing the battery. There is no response from the fan or the lights to the remote. The fan will adjust with the pull chain, however, the lights do not turn on with the chain. I have already adjusted the DIP switches also with no response. I don't know where to go from here. Please help.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    May 4, 2009, 10:34 PM

    Replace the remote.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
    bububu's Avatar
    bububu Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Nov 9, 2009, 07:59 PM
    We have the same remote with the same problem. The only difference, it's hit the floor a few too many times. The last being a quick grab by the baby while carrying him past the doorway where the remote was mounted. The remote didn't show any outward signs of damage, though it did have a tiny rattle when shaken. Needless to say, it probably cannot be repaired and I'm presently on the hunt for a replacement. Good luck to you.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Nov 12, 2009, 10:08 PM

    Contact the manufacturer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay UC7083T Remote Issue [ 8 Answers ]

I've read the other 3 posts about these remotes but none of them solved my problem. My remote controls the fan functions just fine (Hi, Med, Low, Off), however, the lights stopped working from the remote. I've had to resort to unscrewing them if I want them off, and vice versa for on. Any...

My ceiling fan remote will not work, hampton bay Model #UC7083T? [ 11 Answers ]

The Red Light Does Turn On But It Won't Work. I Threw Away The Instructions Please Help!!

Faulty remote or is it the remote sensor in the Hampton Bay fan? [ 3 Answers ]

Hampton Bay Ceiling Fan - 4 yrs old. Remote model # UC7078T. Tried turning on the ceiling fan light and it didn't work, so I replaced the battery and I was then able to turn on the light. I then tried to turn off the light and it doesn't work. The light remains on. Nor do any of the fan...

Tip: Hampton Bay Remote Fan - Fan works by remote, lights do not. [ 10 Answers ]

I figured this may help somebody here. I have a Hampton Bay remote controlled ceiling fan... the kind without pull chains... and the remote will only operate the fan portion but not the light. The light is always on. Not a big deal, as the light switch on the wall could be used to turn the light...

Hampton bay remote control for hampton bay fans [ 2 Answers ]

We cannot get the ceiling light to go off on our fan in the bed room. It would not go on and in the middle of the night is just came on by itself and we can not get it off Joanne Moreland

View more questions Search