Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cutting, seaming corian countertop
[ 1 Answers ]
I have a free corian countertop, which is exactly the correct length for my kitchen countertop over my cabinets. However, the integrated sink is in the wrong place. I want to cut off one end and then take that piece and add it to the other end. I have the corian adhesive, which I bought over the...
Cutting corian for an open hole
[ 5 Answers ]
I'm trying to cut a hole about 7" diameter in a corian counter top to use for trash. How do I get a finished (smooth) edge like the edge of the countertop itself?
Cutting notches a Corian countertop
[ 11 Answers ]
I have a Corian counter top. I purchased a stainless steel slide-in range. Because the range is wider in the front, it will not slide all the way into the counter top opening. I need to cut notches in the counter top on either side of the opening about 1/2 inch wide by 2 inches deep. Can I do this...
Cutting a corian countertop
[ 4 Answers ]
I need to enlarge the opening for a new cooktop in my corian counter by 1/2 inch. I've been told that I can do this with my jigsaw and a wood cutting reverse blade after taping the area to be cut. Is this correct? If not, how would I do this? I would prefer to use my jigsaw rather then a router...
Cutting through corian countertop
[ 1 Answers ]
What is the best way to cut through a corian countertop. We bought a new slide in range - but this one is a couple of inches wider than our old one. The countertop has to be cut to fit in the new range. Can anyone offer suggestions? View more questions Search
|