Ask Experts Questions for FREE Help !
Ask
    mdr37129's Avatar
    mdr37129 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 8, 2009, 09:36 AM
    How do I replace the thermistor in my Kenmore "by Whirlpool" Dryer?
    My Kenmore Dryer, model 110.82836100 shuts down before finishing cycle, with an E1 Error message. This site stated E1 means thermistor is bad. OK, I have the part, I need diagram or instruction? Please, any help would be appreciated.


    Mdr
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Nov 8, 2009, 04:28 PM

    See if the three stories told here will help you out.

    If it is the "thermal fuse" instead of thermistor, then it is a pretty easy thing to replace.

    Best of luck,
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite HE4 Elec. Dryer "PF" error code [ 6 Answers ]

My Kenmore elite HE4 electric dryer will not work. The screen displays "PF" power failure, but there was no power failure. Th dryer is maybe 2 years old and worked fine until now. I tried holding down the START button but it still doesn't work. I tried unplugging and tripping the breaker still...

How can I tell if my Whirlpool Duet Dryer "user interface" is fried? [ 1 Answers ]

I need help diagnosing and/or confirming the problem with my Whirlpool Duet dryer (model GGW9200LW2) and would appreciate your advice. The light comes on when you open the dryer door (indicating power to the unit), but the electronic control system doesn't show anything - no error codes, nothing,...

Kenmore "Elite" Gas Dryer won't turn on. [ 9 Answers ]

Hi, What is the difference between the thermal fuse and the thermal shutoff ? Are they different areas of responsibility ? I would think a fuse and shutoff are the same thing. Thanks

Kenmore "elite" dryer [ 1 Answers ]

Do you know which connections are which for the electrical cord wiring? I've got to change the three prong factory cord to a four prong cord which, for one thing has four wires where the other only has three, and the factory cord has three grey wires that are not identified as to which wires are...

Whirlpool Dryer - itermittent "fluff dry" cycle stops [ 4 Answers ]

Our Whirlpool dryer has a cycle for intermittent dry or fluff cycle... it seems that it runs fine, then when it shuts down at the intermittent of fluff cycle it will not turn back on again, any thoughts? Kirk

View more questions Search