Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a light kit to ceiling fan w/ light & dimmer switch
[ 6 Answers ]
I would like to add a light kit to a ceiling fan(cannot find a name on it) that is currently hooked and working up in our family room - since we moved in 6 years ago (house was built in 1991). I would like this to operate like our bedroom ceiling fan (which already has a light attached) and...
Adding an outlet to a light receptical
[ 2 Answers ]
Hi, I need to add a 2-conductor (black/white/copper ground) outlet to a light receptical. The light is part of a circuit that powers my shop. It has two black wires twisted together, two copper ground wires twisted together, two white wires connected to one post of the receptical, and a red wire...
Adding a new light with its own pull string to existing light and switch
[ 8 Answers ]
Howdy. I have a 50 year old house where the bathroom light shares a common wall with the back of the master bedroom closet. I want to add a pull string light in the closet and tap the power off the bathroom light. The bathroom light is switched and the power comes first to the light and then...
Adding light switch and outlet
[ 2 Answers ]
Hello, my name is Tony I would like to begin with the setup I have in my house, and then ask the question and what I would like to do. First off, in my front entry way of my home, it's approx. 6 years old, so fairly new. I have a set of 4 light switches on the wall, one of them controls outside...
Adding GFI outlet to garage light switch
[ 2 Answers ]
I have a switch that controls the outside garage light and would like to put an outlet next to it. The switch has a black wire and a wite one marked black. So do I just add the switch in to the hot (black) wre then make a "jumper" wire from the white side to the black hot side of the switch, and... View more questions Search
|