Ask Experts Questions for FREE Help !
Ask
    pro const's Avatar
    pro const Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2009, 05:44 PM
    Can't get my Goodman furnace working
    I need help getting my goodman furnace working, I've changed the igniter and the pressure switch and it still isn't working. The light keeps blinking and it says on the door that it's a 115v reverse polarity, does anybody know what that means?
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Nov 4, 2009, 06:41 PM

    Odds are you are going to need a new control board. Reverse polarity means the nutral and the power are hooked to to wrong wires. But inless you have change some wiring lately this can not be the case, thus probably your control board is going bad.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Nov 4, 2009, 08:45 PM

    If I were in your place I would unplug the furnace and go into the box where the power cord enters the furnace. I would disconnect the Black and white wires, All The Time Remembering Which Wires They Were Connected To. Now I should connect them back just the opposite from how they were.

    If this does not do the job I would then switch the wires where you connected the new pressure switch.

    Let me know what happens.
    pro const's Avatar
    pro const Posts: 8, Reputation: 1
    New Member
    		  
    #4

    Nov 4, 2009, 08:57 PM

    Thanks guys, I'll let you know what happens
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace not working after turning off and back on [ 6 Answers ]

Hello, we purchased a Goodman furnace June 2006. When we turn off the furnace, and turn it back on, the furnace does not work. I've left numerous voice mail and text messages for Air Kings in Columbus, Oh and they do not return my call. This is the company that installed the furnace. It is 30...

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman igniter not working [ 14 Answers ]

I have a Goodman GMP125-5 Rev B. The flue fan starts up and then I hear a click like the igniter should be glowing, but it doesn't. I replaced the igniter last year. I also pulled it and there are no cracks. This is the first time I have attempted to use the heater since last spring. Thanks, Al

Goodman Gas Furnace Not Working [ 2 Answers ]

I have a Goodman Model # EG030075-1AB REVC Gas Heater it has been converted to run on LP Gas. Furnace has worked fine for years. Turned the heat on and nothing happens. The LED on the control board is not lit. I checked the voltage at the control board and all the voltages appear to be normal. ...

View more questions Search