 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hunter fan thermostat 859m
I am trying to get this thing set right I think it turns on on cool I have the feed wire to the black wire and the red is the load, so if I wire it backwards being feed to the red and black to the load. I have it in conjunction to a pellet stove not hooked to it, but I would like for the ceiling fan to turn on when the stove starts to heat:
|
||||
Check out some similar questions!
WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...
My friend recently purchased some 859M room thermastat and wall heaters... His question to me was:"even though the thermastat dial is turned all the way to the left(in the off position), why do the wall heaters still click on? Is there a room comfort setting that makes them always stay at least...
Can anyone tell what wires go where? I've got red, blue, green, white, black, orange, brown and yellow. And the hunter thermostat has g, w/b, y/o, rc, rc1, rh, and y1.
What is the reset hole just to the left of the filter reset on hunter model 42995b for ? Have misplaced instructions. Thanks for any help
Just got a Hunter Thermostat my old one s wires are R,G,Y,W,B. the new one is G,RC,RH,Y/O,W/B,Y1. How do you wire this one I wired it like the instruction and AC works but NO Heat?? Help
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
