Ask Experts Questions for FREE Help !
Ask
    moran1's Avatar
    moran1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 17, 2006, 05:16 PM
    Water heater
    How to re-lite pilot lite on gas heater.
    andrewcocke's Avatar
    andrewcocke Posts: 439, Reputation: 22
    Full Member
     
    #2

    Nov 17, 2006, 05:46 PM
    Turn the knob on the gas valve to "pilot", then press on it. Light the pilot with a match or lighter.
    You will need to hold the knob in for a few seconds while the thermocouple reads the flame. If it takes longer than a minute, then you may need to tighten on the thermocouple or replace it.

    Once the pilot is lit, and stays lit with your finger off the push valve, then turn the dail to "on". The heater should kick in.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need help deciding between a tank or tankless water heater [ 19 Answers ]

Which one saves me money; the tankless water heater or conventional tank water heater? :confused:

Brand new water heater: Starts hot, then water gets cold after few seconds [ 9 Answers ]

We just moved into a brand new condo which has its own water heater. We went to take a shower this morning and the first few seconds of the shower were very hot, then it went cold after 10 seconds. We tried again after half an hour, same thing. There was enough hot water for my husband to shave but...

Water heater [ 1 Answers ]

Is It Necessary Or Advised To Drain My Water Heater Periodically, To Prevent Rust In Bottom And Eventually Leakage, It's A Gas House Water Heater. My Plumber, When Installilng It, Said It's Not Necessary, But Maybe He Just Wants The Business.

Water heater [ 1 Answers ]

I bought my house in May and have been having a problem geeting hot water in the bathtub in the morning. The water seems to be hot everywhere else but the tub. It will finally get semi hot but winter is coming and I need hot water in morning.

Water heater [ 6 Answers ]

I wanted to bounce something off you guys about my water heater we just replced on Saturday. After a very long day of problems trying to install this thing because we couldn't get the lines dry enough to solder on the cold supply, we were all ready to pack up and noticed the fittings where the hot...


View more questions Search