Ask Experts Questions for FREE Help !
Ask
    masonkl's Avatar
    masonkl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 1, 2009, 04:01 PM
    Burners do not fire
    The furnace starts but the burners do not ignite. After trying to ignite twice, the furnace kicks off.
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Nov 1, 2009, 04:56 PM

    Sounds like a bad ignitor
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Induction motor comes on, burners don't fire, motor keeps running and running [ 1 Answers ]

I have a tech-4 true blue 90. Induction motor comes on, blowers never light, motor keeps running and running, won't shut off. Board does not flash anything.

Local fire reg vs state fire reg [ 3 Answers ]

California state law requires 100 feet of vegetation clearance with 30' cleared and 70' reduced veg. The local fire district is saying all 100' must be cleared. Can the local regulation be stronger than the state? Thank you for any help.

Rheem boiler burners will not fire up [ 2 Answers ]

I have an older Rheem gas hot water boiler heater - pilot is on, and I have turned up the thermostat, which appears to be working (saw a spark in the mercury when I turned it up) - burner is not coming on - what's wrong?

Gas burners fire then turn off, then repeat. [ 1 Answers ]

When the furnace sits all night @ 68 and then in the am I turn up the thermostat to say 71. The burners start to fire and then shut right off, they run no more than 10 seconds. Then the blower comes on and the burners start firing again. Then they shut off again, its an on and off again cycle every...

View more questions Search