Ask Experts Questions for FREE Help !
Ask
    bosox824's Avatar
    bosox824 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2009, 04:26 PM
    Changing a T-10 Spindle
    How do I change the T-10 spindle, took covers off, removed packing nut, removed brass body, removed spindle. Replaced the same and now the handle is hard to turn

    Thank You
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Oct 29, 2009, 07:30 PM

    OK this got me thinking pretty hard. I do a lot of repair work and can't picture what a T-10 spindle even is, tell us.
    KUXJ's Avatar
    KUXJ Posts: 975, Reputation: 97
    Senior Member
    		  
    #3

    Oct 29, 2009, 07:34 PM
    Hi! bosox824, welcome to AMHD :) , Hi! b1, you must have been reading my mind.

    Since there's a packing nut, maybe it wasn't pre-loaded properly or is set to tight?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Oct 30, 2009, 04:57 PM
    Well Boso,
    Seems like we all want to know what in hell a " T-10 spindle" is and what's its function Google didn't have a clue so enlighten us. Cheers, Tom
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #5

    Oct 30, 2009, 07:04 PM

    I guess it just the one slightly larger than my T 9
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn Chief blade spindle? [ 16 Answers ]

Trying to find out where I can get a Lawn Chief blade spindle? It is a Lawn Chief 1032 Model 300H serial number 229948... do not know year... any help would be appreciated..

Symmons shower diverter spindle [ 0 Answers ]

Hi,I have just replaced my Symmons shower diverter spindle again(TA-25A)because of a leak and now have a new problem. I have to replace this diverter spindle every year or so because the plastic on the end by the o-ring cracks and it leaks water down through the first floor ceiling.The problem now...

How to replace symmons spindle [ 1 Answers ]

How do you remove old symmons spinde and replace it with a new spindle and diverter Handle??

Spindle to handrail attachment [ 1 Answers ]

Hello, I’m in the process of installing new deck handrails and went with the pre-cut for spindles type of railing. (They have square holes routered out to seat the spindle in) In theory I figured it would simply be a matter of installing the pre-cut rail on top and flip one over for the bottom to...

Problem with spindle on MTD 42" mower [ 3 Answers ]

I have a bent spindle on my 600 series Yard Machine. It is not hard to get to but I have never taken one apart before. Can I just swap the spindle out for a new one and just re-pack the bearings? I believe the housing is OK, just the spindle is bent. What do I need to look for to make this...

View more questions Search