Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water softener resin clogging water supply lines
[ 1 Answers ]
We have a water softener that has a resin filter that has broken numerous times due to surges in water pressure. This time we didn't realize it had broken in time to bypass the softener and avoid getting resin in the lines again. We've already flushed the resin out of the 2 toilets and 2 sinks...
Weed eater xr-85 fuel lines connection
[ 1 Answers ]
I am replacing the gas assembly on my (pulan) weed eater xr-85, I need to know how the fuel lines connect to the carborator. I have one line coming from the tank and one from the primer pump.
Maximum distance of a sanitary appliance from a water heater
[ 1 Answers ]
I am working on the plumbing of a villa. It has three storeys, only one water heater is to be placed in the basement (must). There are 15 bath rooms. The height from the basement to top floor is 50 ft and the horizontal distance is 80 ft. This makes a total distance of 155 ft excluding friction...
Yellow water from cold & hot water lines on city service
[ 1 Answers ]
I recently bought a house that is ~30 years old. It has copper pipes. When I first noticed yellow water I flushed my hot water tank, but the water problems persists and it occurs even when I'm running cold water. There is some sediment in the water that looks like the iron content in well water,...
Adding connection to 4" sanitary line
[ 1 Answers ]
I am adding a shower drain to a 4" iron underground line. I looked at Fenco and their flexable wye adapter with clamps said not for underground. They also supply a saddle adapter. The saddle adapter does not say anything about underground use. I would like to go from the iron line to the shower... View more questions Search
|