Ask Experts Questions for FREE Help !
Ask
    Aliaac's Avatar
    Aliaac Posts: 6, Reputation: 1
    New Member
     
    #1

    Oct 28, 2009, 08:08 PM
    Compression faucet stem leak!
    It's a quarter turn valve. I found the exact faucet stem I purchased and it's identical to the old one. If you go to F.D. & Sons Hardware and search for STOCK #: 17312B you can see what I'm dealing with. The brand is Danco. Let me know what you think I need to do further to fix the leak since replacing the old one didn't work. Thank you
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Oct 29, 2009, 04:42 AM
    Tell us exactly where it's leaking from. Out the spout? From the stem? Where? Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower and leak between stem and bonnet nut [ 4 Answers ]

We have water leaking out from between the stem and bonnet nut on our hot watter handle in the shower. We tried to replace the whole thing but the old seat is stuck in a stripped. We bought the tool (L shaped thing) to remove it but it will will not come out. If we leave the old one in and...

What is the best way to stop compression valve leak? [ 10 Answers ]

What is the best way to stop a leak from a newly replaced water compression value with a new ferrule, etc? I have a small leak coming from the back of the bolt that screws into the valve. Is it possible that the end of the copper pipe was not flushed against the valve to get a tight fit even if...

Hot water stem leak [ 3 Answers ]

My home was built in the 70's. My guest bath has a shower tub combination. There is a hot water handle, cold water handle and you pull up a diverter on the spout to the tub to send the water to the shower. When I turn on the hot water (knob on the left) water comes out of the spout and water...

How can I get the retaining nut off my tub compression faucet? [ 6 Answers ]

Hello. Thanks in advance for any help you can give me. My tub, which has a three-faucet system (hot, cold, shower diverter) leaks. Badly. I read up on how to change the faucet (compression type), and I have managed to get handles and etruscheons (sp?) off. However, I cannot get the retaining...


View more questions Search