Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is it safe to replacing a lighter gauge wire with a heavier gauge
[ 11 Answers ]
Hi all, One of my baseboard heater (240v)'s wire was broken can I replace it with a heavier gauge wire? Also can different gauge ground wires (copper wire) be connected with a wire-nut? IS THIS SAFE TO DO? OR Will this create a fire hazard?
Fuel gauge wiring
[ 2 Answers ]
I have a 72 gmc pickup and I can't find the original or a piece of the original wire that ran to the sending unit.so what I'm trying to do is to use the gauge itself and hard wire it,but the problem I am having is everything because I'm not understanding what order all the wires should be in from...
Connecting 14 gauge wire and 12 gauge wires in the same blue box.
[ 2 Answers ]
I am wiring my basement. All the outlets are running off 2 independent 20 amp circuit breakers connected to each other by 12/2 wire. I wanted to run some stubs off my 12/2 outlets. All each stub would do is run to a small light (max 180 watts) and of course a light switch. Since I ran out...
Wiring different gauge wires (18 awg to 14 awg)
[ 5 Answers ]
I recently bought a house that has a nice wall lamp in the living room that I would like to keep as I renovate it. The lamp came wired with 18 awg wire (1 neutral, 1 hot, and 1 ground). The previous owner wired the lamp to a standard wire with a plug to make it a plug-in fixture. I don't know if...
Mixing wiring and outlet wire gauge .
[ 5 Answers ]
If I have a 15 amp circuit, and 14 gauge wire, why can't I install a 20-amp outlet? If a 20-amp device is plugged into the outlet, won't the circuit trip, preventing overload? Also, 20-amp outlets and 15-amp outlets appear to have the same connection for devices (two prongs and a ground hole),... View more questions Search
|