Ask Experts Questions for FREE Help !
Ask
    jinoyjohn1's Avatar
    jinoyjohn1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 24, 2009, 12:00 PM
    Hwo to identify the speed terminals and line on fanmotor
    Hai
    How to identify fan motors speeds terminal(low high medium)and capacito line and phase line
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Oct 24, 2009, 07:03 PM
    Should be on the lable on side of the motor,, can`t help much other than that,not knowing the model numbr and brand name of the motor
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Identify artist signature on french etching-dogs in bathroom line [ 6 Answers ]

Please help me identify the signature of this french artist - this is a signed original humorous etching of dogs in line for a "water closet" tree - the big white bulldog points to the end of the line for the anxious, dribbling hound dog , it says, "a la queue!!" on the lower left side which means...

Dual run capacitor(3 terminals).or is single run capacitor(2 terminals) OK? [ 2 Answers ]

Hello all, I have an older Amana HVAC system in my home. Home is 6yrs old. It Appears that my condenser unit was struck by lightning because one of the 3 terminals on the dual run capacitor was blown/melted and all the wires connected to the dual run capacitor were fried (It did storm the...

RTH8500 Wiring O and B Terminals [ 5 Answers ]

Please help. I want to replace an old Honeywell CT3600 thermostat with a new touchscreen RTH8500 on a gas hot air furnace w/AC. I think my confusion is what to do about the O and B wires (changeover HEAT and changeover COOL, as I understand it). Here is manual for new RTH8500: ...

I have 6 wires with only 5 Terminals? [ 3 Answers ]

I have a new 2007 honeywell RTH230B Programmable Thermostat. I am replacing the old thermostat with this one and I have 6 wires with only 5 terminals. Last winter I installed the thermostat for the heat and I got the furnace working with 5 wires, but I still have one wire left and now that it's...

View more questions Search