Ask Experts Questions for FREE Help !
Ask
    pisher's Avatar
    pisher Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 24, 2009, 01:17 PM
    Reset hour meter
    How do I reset the hour meter on a panasonictv pt-40lc12.got a bulb from friend who gave me the TV but never reset the meter or the bulb.thanks for the help
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
     
    #2

    Oct 25, 2009, 12:08 PM

    The owner's manual for the TV is here:

    Panasonic PT-40LC12 Support and Service Information

    Page 60 tells how to replace the lamp. This s a link to the manual for the bulb (Panasonic TY-LA1500 -- you can Google it if this link causes you problems.)

    Panasonic - TY-LA1500 LAMP Manual

    If that doesn't work, try this:

    Panasonic TYLA1500 MULTI MEDIA DISPLAY TV - LAMP Manual

    Here are the instructions (copied from the manual)

    1. Be sure the power cord is plugged into a properly grounded wall outlet. Then, press the POWER button or the remote control to turn the power on.
    2. While pressing the VOL- button on the projection display, hold down the PIP button on the remote control at the same time for more than 5 seconds. (picture shown in the document).
    3. When reset procedure is complete, the screen on the right will appear. (The picture of the screen says "LAMP TIME WAS RESET TO 0.")
    2. Press the POWER button on the display or the remote to turn the power on.
    3. While pressing the VOL- button on the projection display, hold down the PIP button on the remo

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Oil primary control reset will not reset. [ 2 Answers ]

Oil primary control green light flashing. Will not reset due to loss of prime. Just Finished cleaning. Changed filter and obviously Has to be bled. AFG model Becket burner 2 years old. How do I get the reset to reset so I can bleed the system? All working till now. Bruce

Zero Hour [ 1 Answers ]

I saw a film in school around the 1980's. I think it was a scholastic 8 mm movie . It was called "Zero Hour" . It was about a group of kids playing a game "invasion". The main character is a little girl named Ming. It was set in the future. The game takes a twist and ends up being a real alien...

What is the avg. Gas p.s.I. From gas meter on the residentcial side of meter [ 2 Answers ]

What is the avg. gas p.s.I. from gas meter on the residentcial side of meter. I think its 5 lbs. I live in Los Angeles, don't know if it changes from state to state.:eek:

Scotts rider 1742 hour meter [ 2 Answers ]

I have a used Scott's 17hp 42 inch cut rider, made by John Deere. I noticed the hour meter is always in display mode and wondered if it supposed to display even when the key is off and removed. My concern is that this will drain the battery? Thanks, Paul

Reset button keeps needing to be reset [ 2 Answers ]

The reset button on our oil furnace needs to be reset every 10 to 14 days. What can be the problem? We are leaving for the holidays and I'm concerned that we could come home to frozen pipes.


View more questions Search