What is the use of neutral zone in dc generator

Check out some similar questions!

I'm certainly not an electrician but maybe someone who is can help me with this. I recently bought a new generator for home backup, camping, and remote powering of tools. The generator had a bonded neutral (the neutral is connected to the ground circuit). The neutral needs to be "floating" when...

NO Heat in One Zone of Multiple Zone System [ 6 Answers ]

The heat in our four zone house is working except for one zone. Digital Honeywell THermostat lights up when programmed, little flame picture appears and click noise is heard, just like other thermostats, but no heat in that zone. Any ideas what is wrong or how to fix. Thanks

Are zone valves or zone thermostats possible with a steam boiler? [ 1 Answers ]

I have an old 4 story building with one thermostat controlling the steam heat to all floors. There is a commercial space on the ground floor and they are complaining that they don't get enough heat sometimes (and on occasion get too much!) They have suggested that there is some way to place a...

Zone heating. One zone won't turn furnace on. [ 3 Answers ]

Hi All, I am using two Honeywell V8043E1012 motorized valves. One zone works but the other one you hear the thermostat click on when you raise the temp but the furnace does not come on. When I use the lower floor thermostat the furnace turns and I get heat upstairs. Is this the problem of the...

2 zone oil heat, 2nd zone runs 1st zone [ 1 Answers ]

Hi, We have a 2 zone oil burner. The 1st zone (upstairs) runs separately and works no problem. The 2nd zone(basment), when we try to run 2nd zone separately , it seems to run zone 1(upstairs) and the baseboard heating upstairs gets hot and heats zone 1 even thought we have the t-stat set low...

View more questions Search

Check out some similar questions!

Add your answer here.