 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell thermostat
I replaced my thermostat with a Honeywell rth31000c digital heat pump is a 2 1/2 ton Goodman unit. Wires are blue, brown, green, orange, yellow, red, and white coming to the thermostat itself. Thermostat has terminals e, aux, y g, o l, r, b, and c please help with wiring this thermostat properly. May need a jumper somewhere. Thanks,
|
||||
Check out some similar questions!
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...
Can anyone tell what wires go where? I've got red, blue, green, white, black, orange, brown and yellow. And the hunter thermostat has g, w/b, y/o, rc, rc1, rh, and y1.
Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
