Ask Experts Questions for FREE Help !
Ask
    sailor24's Avatar
    sailor24 Posts: 7, Reputation: 1
    New Member
     
    #1

    Oct 21, 2009, 05:47 PM
    Icm ground location?
    Hi
    I just chenged my icm with a new one. I thought problem solved. Wrong. I had
    Again with start problem. It seemed like I don't have spark on all clinders. Same as it happened before I replace icm.

    This time I bought whole distributor with new icm again. Starts again.
    I know I got to check grounds. Smb went through this same and it happened to be ground by icm after 150 in drain. I don't have tha kind of money. I'm ussing my "karma chips" with auto parts store.
    An help appreaciated.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Oct 21, 2009, 05:59 PM

    Did you install a new coil?
    sailor24's Avatar
    sailor24 Posts: 7, Reputation: 1
    New Member
     
    #3

    Oct 21, 2009, 06:22 PM

    Yes I did but only this time with new distributor lets see.
    sailor24's Avatar
    sailor24 Posts: 7, Reputation: 1
    New Member
     
    #4

    Oct 21, 2009, 06:24 PM
    And I installed new coil with the 1st new icm no spark!
    Lets see
    sailor24's Avatar
    sailor24 Posts: 7, Reputation: 1
    New Member
     
    #5

    Oct 21, 2009, 06:27 PM
    I don't want to interchange icm to new distro to see if 1st new icm failed on me, although I'm considering as option.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #6

    Oct 21, 2009, 06:39 PM

    More than half of all new aftermarket distributors for Hondas have not worked on this site.. I only recommend genuine Honda distributor housings--aftermarket ICMs and coils have been fine.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leveling the ground with mulch for above ground pool [ 3 Answers ]

I was wondering if I could use mulch to level the ground for my above ground pool. I was told not to use sand, and I have a hard time digging.

Ground rod location [ 1 Answers ]

I am running service to detached garage apt. Here's the basics: underground service from utility's pole to meter can at rear of house. Then directly adjacent and connected by 2" pvc , second , un-used meter can. From there 2" PVC under ground to new 200AMP distribution panel in interior of garage....

Do you install a 120v 15 or 20 amp receptacle ground up or ground down? [ 15 Answers ]

Does the code have any stipulations on ground up or ground down? If so Prove it. An I am not talking about local ordinances nor the authority having jurisdiction. Simply the NEC.

Work location is different from employer office location [ 1 Answers ]

I work for NY based company and as an IT consultant. My actual work location is at the client's office which is in NJ for the whole of 2007. I also live in NJ. Will my income be considered as income earned in NJ or NY? My employer has withheld NY taxes though I live in NJ and my work location is...

Open ground when neutral not touching ground [ 3 Answers ]

Hi, I was moving around a room and noticed my wife wanted her desk elsewhere. I decided to, since she would have her computer on it, check the outlet she would be moving to. It seemed old so I changed it. I noticed before I changed it that with my GFCI tester, all sockets on this circuit were...


View more questions Search