Ask Experts Questions for FREE Help !
Ask
    RichCa's Avatar
    RichCa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2009, 03:28 PM
    Heater won't ignite
    I have a Rudd self contained heating and air conditioning heater.
    When I call for heat the electronic ignition does not ignite the burner tubes.
    I smell gas then everything shuts down.
    What do I do?

    Rich
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Oct 21, 2009, 05:02 AM

    Rich -

    While I am not familiar with the Rudd furnace, I'd take a look at the "hot surface ignitor". This part should be easy to test and replace. Get it at a local appliance parts dealer.

    Best of luck,
    WallyH
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Oct 21, 2009, 05:06 AM
    WallyHelps is correct. You should see a glow around the burner area when the unit is trying to light. If you do not see that glow it is a good possibility the ignitor is defective. TIP: Do not touch the black/grey area of the ignitor with your fingers. The body oils damage the ignitor especially if you are replacing with a new one.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas Wall Heater Will Not Ignite [ 3 Answers ]

The heater has been working fine winter with the pilot light on all winter. I accidentally turned off the pilot light. Now it will not ignite. It is about 5 or 6 years old. The heater is a basic unit that is manually controlled. Ie: No thermostat to control the temperature. You simply turn the...

Kenmore Gas wall heater pilot lights, but won't ignite. [ 4 Answers ]

Hi there, I have a 1986 or 88 Kenmore gas wall heater Model # 829.756660 in the home that I am renting. I got the pilot light lit, and the thermostat makes the click noise when I turn it on, but the heater itself doesn't get any flame. Could this be my ignitor? if so can you tell me how to replace...

Monitor Heater will not ignite [ 1 Answers ]

Where do I start to narrow down the problem? Or what might the obvious problem be? Thank you, Lisa

My heater won't ignite [ 2 Answers ]

My heater won't ignite sometimes, what should I do?

View more questions Search