 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gibson GL1RC040 furnace fan runs all the time
Our New Gibson Furnace blower fan and draft inducer fan started running all the time no matter if the stat is on or off even unhooked the stat and still runs. The light on the circuit board is flashing a code 1. Does anyone have any experience with these furnaces and this problem?
Thank You |
||||
Check out some similar questions!
Gibson Furnace will blow cold air sometimes instead of warm air. I believe it to be a problem with a wire because we had it worked on before. There are also two lights - one stays on continuously and the other one will blink. Is this something I can repair myself? If so, how? The furnace is...
Hi,I noticed my gibson furnace m#KG6RK 072C-12A S#KGA021204267 cycling an not starting. It locked out.got a flashing light said I had a bad ground.so I took it apart and found nuetral wire melted to flue and other wires melted to inducer.I clip out bad wires and reconnected and cleaned off flame...
Hi, I have a gibson m#KG6RK 072C-12A s#KGA021204267.natural gas.I've cleaned the flame sensor,that seem to work for a day with the furnace starting up on the first try.then I inspected further and found some wires that melted on the inducer\flu parts.so I cut out the bad part of the wire and...
I have a gibson forced hot air furnace and a have a code that is telling me that the pressure switch is open. If I drain the water out of it it will run for a short period.. Do you think I need a new pressure switch or do I have a drainage line clogged. Model number KG6R060C-12a
Everything may be fine with my system, but it seems that it is taking a very long time for the home to heat up, which results in the furnace running all the time. The natural gas furnace is struggling to even get to the 68 degrees the thermostat is set to, and the temperature is only in the 30s...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
