| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
200 amp panel feeding a 100 amp panel roughly 130' away
 [ 7 Answers ]
 Hi all, We are building a apartment above the garage,my question is what size wire do I need to run from the 200 amp panel to the 100 amp panel roughly 130' away? I want to use aluminum wire as I think copper would be to costly. Thanks for your help in advance, Dude :eek: 
Which panel should I go with?
 [ 5 Answers ]
 Greetings all, I am need of replacing an old Pushmatic Service Panel. The only breakers I can find for it are on e-bay. Plus I need to add a sub-panel in the garage for the new addition my wife wants. (She gets a walk-in closet and a bigger master bathroom with a tub and a separate shower, I get... 
Sub Panel
 [ 1 Answers ]
 I'm Remodeling My House From 2000sqft To 3900sq-ft And I Will Like To Know What Size Panel I Should Put And Brand? 
Adding a electrical sub panel
 [ 1 Answers ]
 I am about to add a attached garage with an adjoining workshop. My main pane has no open slots, my question is can I connect to the main wires coming into the panel, and go to a sub panel with a 50amp breaker. If so what size/length wire do I use? Thanks Joel . Email [email protected] 
Question about an electrical panel
 [ 2 Answers ]
 I am in the plannnig stage of a basement remodel. I checked the breaker box and found that I have 2 circuits currently in the basement. One is for 8 overhead lights and one is for 4 GFI outlets located around the basement. My question is, there are 5 open slots in the panel that I could use... View more questions Search 
 |