Ask Experts Questions for FREE Help !
Ask
    les0011's Avatar
    les0011 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 17, 2009, 12:38 PM
    Washing machine repair, ken
    Kenmore series 80. Overloaded. Does not agitate. At spin cylce it buzzes, agitatior does not turn
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Oct 17, 2009, 05:58 PM

    You need to take out all the wet clothes from the machine for starters. Then see if it will agitate or spin. If it does not, then guess what? You burned out your transmission or broke a gear.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Free repair manual on line for Kenmore washing machine [ 7 Answers ]

I am looking for a manual for the 90 series Kenmore washing machine.

Where can I find a free repair manual for a kenmore 90 series washing machine? [ 3 Answers ]

I have a 90 series kenmore washing machine and it starts to spin on the spin cycle, but quits after spinning very slow for a short period. The transmission is turning but not the tub. What is the problem? Newman Starke, [email protected]

Washing machine repair [ 4 Answers ]

I have a Roper washing machine. It is about 10 years old, it works good but it leaks water when in use all the hoses are tight, must be underneath. What are possible repairs.

In-Wall Washing Machine Manual Shut-off Valve Leaks Into Washing Machine [ 9 Answers ]

My hot water automatic shut-off valve on my washing machine started gushing water. So I figured no problem, I would turn off the water at the in-wall manual shut off valve for the washing machine. But even when I turn it all the way off, it leaks. It leaks into the hose going to the washing...

Washing Machine Repair [ 1 Answers ]

I own a Kenmore Series 80 Washing Machine Model#110.26842694,Serial # CJ 3231197 and I have an operating problem; The machine stops on rinse cycle and does not operate until timer is set to next setting which is the spin cycle; during this time the water in drum does not drain. Please advise of any...

View more questions Search