Ask Experts Questions for FREE Help !
Ask
    muddyd's Avatar
    muddyd Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 3, 2009, 04:32 PM
    Spa stops working, then flashes FL
    Spa is several years ols but pack is about 3 or 4. It is a Balboa pack. Had been shut down for several months, cleaned it out filled it up and it did come on and heat but the next day it was off and the controller had FL instead of a temp. Please tell me what's up. Thanks
    chemicalfree's Avatar
    chemicalfree Posts: 22, Reputation: 1
    New Member
     
    #2

    Oct 17, 2009, 10:49 AM

    Check your filter, if it is clean then you could have a bad pressure switch. A bad pressure switch would give you the FL on the top side.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrical on hot days 1circuit stops working [ 3 Answers ]

Sister has called and I am assuming by her ?that these lights are on same circuit.House is patio home & living room is vaulted ceiling.She tells me that on hot or very hot days the ceiling fan and laundry room light won`t work. Do you think wires (romex)would be melting.my plan is to go check...

Prism 3d engine stops working. [ 2 Answers ]

Can anyone help me out with the prism 3d engine.everytime I try to play one the 18 wheels of steel truck games the prism 3d engine stops working and valusoft was no help at all with this problem.

Furnace stops working and needs to be bled [ 1 Answers ]

Hello, I have a modular home with a Miller furnace, Becket motor, up until 2 days ago I have not had any problems with it. Then I woke up cold. The light on the module was flashing, I pressed reset and nothing, I bled the line (took about 2-3 seconds) Kero started flowing so I closed it and...

Well Pump stops working [ 4 Answers ]

Anything to do with plumbing is my worst area to deal with. Twice in the past week our Goulds above ground jet pump suddenly stops it's on and off cycling while running the water and the water quickly ran to a trickle and stopped. After about 2 minutes it suddenly started again, but with spurts of...


View more questions Search