Ask Experts Questions for FREE Help !
Ask
    pwhjr9154's Avatar
    pwhjr9154 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 13, 2009, 06:29 AM
    Need bushings for a Unico Garden Tiller
    I need 2 flanged bushings for the tine shaft on a Unico Model #5055-3 WITH serial # B. The measurments of the bushings are as follows. 1.25" inside shaft diameter, 1.75" outside diameter, 2" flange diameter overall length of bushings are 1.25". Where can I find these parts and possibly a parts manual
    For this tiller. Who made this tiller.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Oct 13, 2009, 11:00 AM

    Hi,
    I have seen one years ago, and do not remember much about it. You will probably be stuck with pricing them at a local machine shop.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trying to find age of garden tiller [ 4 Answers ]

I recently acquired a used Lowe's brand garden tiller, manufactured by MTD. I have the model and serial number, and just wondered if there is any way I can find out the year it was made?

Garden tiller won't run. [ 6 Answers ]

Bought a Mantis tiller and loved it, started every time and did a good job. Used it approx. 2 yrs. Got it out this year, gased it up and it started within 2 or 3 pulls of the rope. When I tried to engage the tines the tiller would stop but would start right up again but kept stopping when I tried...

MTD Garden Tiller [ 1 Answers ]

[FO MTD Garden Tiller - Model #317385-500 How do you put the two drive belts on? Is it possible to get a manual for that model?

Green Thumb Garden Tiller [ 1 Answers ]

Hi, I recently purchased a 8 HP Rear Tine Green Thumb Tiller. The tiller is chain driven and the tines keep locking up. I thing that something is broke and there is a piece of dabre inside the houseing. I took the tiller apart but the tine axel is keeping me form separating the housing. The...

MTD Garden Tiller [ 1 Answers ]

2005 MTD, 7 hp, garden tiller will not shift out of forward gear. Why?

View more questions Search