Piolot on but heater doesn't activate

reepa Posts: 1, Reputation: 1

New Member

Oct 12, 2009, 10:37 AM

Piolot on but heater doesn't activate

My pilot light was off for some reason, so I re-lit it. When trying to set the temperature, the furnace does not turn on. But the pilot light is on. What can it be?

Check out some similar questions!

Roper wash machine agitator doesn't activate [ 1 Answers ]

Roper wash machine agitator doesn't activate when in wash cycle but makes high pitch noise...

New hot water heater doesn't work [ 6 Answers ]

I just bought a new whirlpool electric water heater. I get no hot water from it at all. The elements are receiving power. Connected power waited 4 hours and no hot water. Any help would be greatly appreciated. Thanks Greg

Dishwasher and washing machine will not activate ON DEMAND water heater [ 1 Answers ]

Dishwasher is kenmore 655.17512202

Heater kicks on but doesn't blow or stay on [ 1 Answers ]

Heater doesn't kick on below 70 degrees. When it does kick on with thermostat set higher than 70 it will turn on run and then blow. (Pilot light works) Doesn't blow as long as it should then shuts off and idles (runs) again. Had a certified furnace repair person look at it. The limit switch was...

Heater doesn't stay on [ 2 Answers ]

My heater is sort of broken. When I turn the thermostat on what it usually does is the heater will make the sound of it getting ready to pump out hot air for a few minutes then the blower will turn on. It heats up the house for a minute or two then turns off and goes back to making the sound of...

View more questions Search

Check out some similar questions!

Add your answer here.