Ask Experts Questions for FREE Help !
Ask
    todd ogle's Avatar
    todd ogle Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2009, 03:39 PM
    Goodman furnace trouble
    I have a new goodman furnace never ben used that will not fire on a call for heat.The induction blower does not come on whe you call for heat.I checked al the limits switchs and the preasure switch all good but no induction blower.can anyone help??
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
    		  
    #2

    Oct 11, 2009, 03:46 PM

    Is it giving you a code? Goodman has a diagnostic light. Are you sure you have a call for heat from the thermostat? Are you sure you have 120 volts to the furnace?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Oct 11, 2009, 03:53 PM

    Okay, you say this is a new furnace, never been used,, do you mean it was never fired after installation? Lots of things that could be going on here, Are you sure you have power to furnace? Is thermostat calling for heat? Was this furnace professionally installed? If so, call back the installer and have them find and fix the problem. IF you installed this furnace yourself, we will try to help you out. If you are thinking it is the draft inducer, check for 120v to motor when thermostat is calling for heat. Hope this helps.

    If this is indeed a brand new furnace, the problem is likely an easy fix.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace trouble codes [ 4 Answers ]

I have a 5 year old goodman 92 that is giving me 5 blinks on the main circuit board. It goes through the start-up routine and after about three attempts the burners will stay on. What does that really mean?

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

Goodman limit trouble [ 11 Answers ]

I have a Goodman model gmp 125-4 gas furnace. The code 4 limit switch code is blinking. I reset all of the heat limit switches, and checked the resistance across the series and read a 0.3 ohms. I know these are working. I turned the power back on after 30 min, and the same error code was being...

Goodman furnace [ 17 Answers ]

I have a goodman furnace. Forced air. No a/c. I turn the power on and she starts. Thermostat is off. No wires are crossed that are visible. The pilot does not ignite but the heating element is on. No gas seems to be coming through. Any suggestions? The furnace is only a year and a half old.

View more questions Search