 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Coleman 92% efficient gas furnace less than 2 years old Model# G2FD046S17G. Will only blow cold air. The lower half of the furnace contains an access panel with a round plastic window, through the window there is a red-light that flashes 3 times and pauses for 2 seconds and flashes 3 times again (I...
Hello I have an old coleman electric furnace in my home that isn't putting out any heat. It will only come on when I put it in manual and I have it set for heat. I know the blower works because it puts out plenty of air. Even with the thermostat put on over 70 degrees it still won't kick on by...
We recently had our furnace serviced through the local weatherization program. They cleaned it and replaced the filters. We tried to use it last evening however it is only blowing cool air. Any help would be appreciated as we are not familiar with furnaces and are not sure what to do.
Hoping for help here. I recently had my ignitor replaced. Before that, the furnace wasn't working at all. Now it starts blowing warm (not hot) air, then gradually over a period of a couple of hours, the air cools down until it is completely cold and the temperature in the house drops drastically....
I have just recently moved into a new house that has a gas furnace ( forced air) in it and we just had to replace the ignitor. Well now its finally working but when its on and blowing warm air after a few minutes it starts to blow out cool air! I just need to know if I need to adjust anything on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
