Ask Experts Questions for FREE Help !
Ask
    meixlman's Avatar
    meixlman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 9, 2009, 12:51 PM
    Age of my Furnace
    How can I find out the age of my furnace?

    Intertherm Nat. Gas Furnace
    Model#UGF-101 AC-4
    Seerial #170-G1

    I'm trying to figure out if I should replace it or not.

    Thanks,
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Oct 9, 2009, 05:25 PM

    You can call Nordyne who makes the Intertherm Furnaces at

    Nordyne
    8000 Phoenix Parkway
    O'Fallon, MO
    636-561-7300

    And ask for Technical Support.

    They will be able to tell you the age of your furnace very easily.

    They do not have an 800 number.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Oct 9, 2009, 05:55 PM
    Try this number for a free be.

    1-888-667-4822
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #4

    Oct 9, 2009, 06:03 PM

    I knew they had an 800 number but only the "trade" has access to that number as it's not on the internet anywhere!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #5

    Oct 9, 2009, 09:10 PM
    I know but look below at the Missouri main. Was out there 6 or 7 years ago for the presidential grand tour as they call it then it was off to Boonville to repeat the show. Was there to give a pep talk to the engineering dept originally. They are a great company with many brands and very good quality control. But they have the same problem as many HVAC manufactures with poor installs by unauthorized people which as we all know equals junk jobs and unnecessary warranty claims.

    here you go

    Facilities
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Stellar Furnace Heating up Furnace Room to 110 Degress? [ 2 Answers ]

I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace [ 1 Answers ]

I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...

Furnace ignites but blower won't start till furnace shuts down. [ 7 Answers ]

(Nordyne/Miller G3RA)-I have a furnace HSI(glow plug) that will ignite and burn until it gets too hot and shuts down. As soon as the furnace shuts down the blower starts to circulate air. The blower circulating air cools the furnace and it reignites.Shortly after the furnace ignites the blower...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search