Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Day & night blower noisy rattles fix or replace?
[ 2 Answers ]
:) Hello My nat. gas furnace may be from 1964 and the blower motor is loud and rattling when fan is on. How much more fuel efficient are new models that salesmen think I should buy? What makes new units energy savers? Can I make my old furnace waste less energy by somehow sealing the ducting and...
Water hammering, water arresters, big pipe flowing into small pipe
[ 2 Answers ]
Hi, I have a water hammer (I'm guessing) problem in our house. All the pipes are under the house and it is a timber house so each time there is a water hammer noise it is extremely noisy. Basically any tap in the house is making the noise when turning on or off quickly with loud bangs. Cold...
Teflon or Pipe Dope for 1 1/4" Water Pipe
[ 7 Answers ]
I am building a project that uses several joints of 1 1/4 " galvanized pipe, including elbows and Tee's. The unit will be plumbed into my 50 psi water system. What is the best way to seal the pipe joints? I have assembled the unit and tested using teflon pipe dope and had several leaks.
Honda accord interior rattles and vibrations
[ 1 Answers ]
I have an 89 accord DX, auto trans, 4 door 133k. The problem I has is buzzing sounds and vibrations from most every part of the dash board, air vents and glove box. Different things vibrate depending on the RPM, MPH, heater fan speed and what gear I’m in. I know the car is old and things... View more questions Search
|