Ask Experts Questions for FREE Help !
Ask
    JRBASSER's Avatar
    JRBASSER Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 7, 2009, 06:18 AM
    Baseboard wiring
    I have a 20a double pole line with one 1500 watt baseboard heater ,#12 wire on a circuit.
    I need to put heat in my bathroom ,its 5x8
    I have no more room to put breakers in my panel
    can I connect to the circuit mentioned above to install another thermostat and heater for my bathroom
    FYE's Avatar
    FYE Posts: 13, Reputation: 1
    New Member
     
    #2

    Oct 7, 2009, 08:30 AM

    Yes, you have 1500w heater on a 20A circuit. On this circuit you can use 3800W max. There for you have 2300W remaining on this circuit.

    Make sure for certain of the load on that circuit before altering.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Baseboard Heater Wiring [ 20 Answers ]

Hello, after reading quite a bit I thought I had this wrapped up but I guess I don't. I am trying to wire up some baseboard heaters for the garage. I have run a 12/2 from the panel on a 20 amp double pole breaker which goes to a double pole t-stat (I want to be able to completely shut off the...

Baseboard wiring [ 2 Answers ]

Hello! I need to hook up a baseboard heater in my bathroom My question is . Can I wire from an existing thermostat that has only one baseboard on that circuit to another thermostat to control the baseboard in the bathroom?

Wiring Baseboard Heaters? [ 4 Answers ]

I am taking on an electrical project in my basement and I am looking for some guidance, I would like to install 3 basebaord heaters in all. 1 5 footer and 2 3 footers. My question is can I run three on on 2 20amp circuits? Any help would be greatly appreciated.

Wiring for baseboard heater [ 1 Answers ]

I need help wiring my downstairs with baseboard heaters. First Heater: I have the main power supply and wire from the thermostat coming in. I then have a wire running from my first heater to the second heater. The heaters are 220-volt. What wires do I connect in order to complete the circuit?

Baseboard heater wiring [ 3 Answers ]

Hi All, I have a question about wiring my base board heaters. I am currently re-wiring my basement, adding a few heaters on the original 240V-20A circuit. It will be handling a total of 3500 W, no problem. The question is about the wiring itself, here's what I intend to do: Run from...


View more questions Search