Ask Experts Questions for FREE Help !
Ask
    vastepside55's Avatar
    vastepside55 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2009, 07:29 AM
    Friedrich Furnace model # olc-11 ama
    I have an old Greenbrier by Friedrich furnace #T840100
    Model # OLC-11 AMA. Serial # 1432.

    I need a blower fan shaft & bearings.

    Can't find anyone is our area of VA that can help


    HELP!! :confused::confused:
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 7, 2009, 07:49 AM
    Blower shafts and bearings are not available for specific models of furnaces . You buy replacement parts by description. Any heating supply house will have the parts.

    Examples ONLY since I do not know exactly what you need.

    Dayton 4C908 Blower Shaft

    Dayton 2A757 Blower Bearing Kit
    vastepside55's Avatar
    vastepside55 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 7, 2009, 08:45 AM

    Thanks that's what I need.!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removal of Friedrich Grohe shower faucet [ 2 Answers ]

I recently purchased a 14 year old home. I have two Friedrich Grohe shower faucets. Both are malfunctioning. The first has very low water flow. The other has luke warm water at high hot setting. Each faucet has a plastic ring with temperature ring on it. I would like to pull the valve on...

Bryant gas furnace model 383 KAV sometimes does not run [ 6 Answers ]

I have a 10 year old Bryant gas furnace model 383 KAV that sometimes does not run. The inducer motor does not come on and there are no codes. If I cycle the power several times it will eventually all work normally at least until the next morning when it may or may not restart after being off at...

Wiring Diagram For Friedrich Furnace [ 1 Answers ]

Need to change the blower speed on an old Friedrich central air furnace... model number GHA075NDC. Wiring bloc has termanals for fast, medium fast, medium slow and slow. Anyone have service manual, wiring diagram or remember wire locations?

Bryant furnace model 310 AAV/JAV [ 3 Answers ]

Thought the thermostat was bad so replaced the thermostat, sounds like it clicks on but not blowing of the air, and the red light still blinks 2 shorts 4 longs, pilot light also won't come on now. Have done the swith where you turn it off for 5 minutes, still trying to troubleshoot, could use...

MY new friedrich ac isn't cooling my apartment.what might be the cause? [ 1 Answers ]

I just purchased a 13,500 BTU ac for my apt. it's it the living room. However it doesn't seem to be cooling anything. It actually feels more humid than anythig. I have read the manual several times and called customer service (but they were gone for the day) so if anyone can help me with this...

View more questions Search