Ask Experts Questions for FREE Help !
Ask
    naresortega's Avatar
    naresortega Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2009, 10:31 AM
    How adjust a tractor belt.
    How adjust a tractor belt, the tractor model is 917.255940, the belt is to make the blades work, thanks.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Oct 4, 2009, 11:28 AM

    Hi,
    There is no adjustment per se. One thing that often happens is that rust/corrosion prevents the moveable parts (spring-loaded idlers) from fully tensioning the belt. It is usually a shouldered bushing that is held by a bolt. It can be taken apart, cleaned, lubed and reassembled
    Manual not readily available, but parts breakdown found in Denmark at:
    http://v-import-manual.s-9.dk/data/a...les/255940.pdf
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Change drive belt on mtd tractor "husky tractor" [ 2 Answers ]

:confused: Any one know an easy way to change belt? And how to loosen pully bolt in bottom of motor?

Murray Snow Thrower Euro Series how to adjust v-belt [ 1 Answers ]

V-belt for the thrower impeller is slack. How do I adjust this?

MTD tractor belt [ 1 Answers ]

What kind of replacement belt does a MTD 18 hp. Model 144P849H205 use or do you recommend? Does the same belt work for the snowblower? The manual states V-belt front #754-0358 and V-belt rear #754-0362?? :confused:

Blade belt on weedeater tractor [ 1 Answers ]

How do you change the belt that powers the blades? It seems that the deck has to be removed but I'm not sure.:confused:

Belt question on MTD tractor [ 2 Answers ]

I need a new blade belt for my MTD tractor. It looks like you have to drop the deck to get it off. Is this correct and what is the right way to do it? Also, when I go to engage the blades now, it engages hard and makes a loud pop. Is this attributed to the belt being worn out or do I have...

View more questions Search