Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Craftsman riding mower engine stops when blades are engaged
[ 15 Answers ]
I have a Craftsman 'Garden Tractor', model number: 917.273070. It has a Kohler engine (model number: CV22S, type number: 75534). The engine starts fine and will run without any issues in all gears. However, immediately once I engage the blade clutch the engine begins to stall. If I place the...
Mtd yard machine
[ 2 Answers ]
My MTD 14.5 hp yard machine has been hard to start for a while. Turn the key and back off several times before it will start.. I replaced the ignition switch and the solenoid and now it does not even make a sound. What else could it be.
John Deer Hydro 175 - blades engaged kill engine
[ 8 Answers ]
Issue: When blades get engaged the engine sometimes stops, when sitting for a 5 minute length of time the enging stops. Have Tried: I disconnected the safety plunger under the seat. This did work for a little while then same issue. I just bought this from my brother, he had told me of this...
Husqvarna YTH2448 engine stalls when blades engaged
[ 5 Answers ]
Good afternoon all, I have a quick question that I am hoping someone can help me with. I have a Husqvarna yth 2448 that stalls when the engine is engaged after running for about 30 minutes. After the mower sits and cools off, it will cut fine again. I checked the seat sensor, not sure if that...
Cub Cadet engine cuts out when PTO engaged
[ 2 Answers ]
Model 2415, engine cuts out when PTO switch is engaged, OR, when simply taking it out of park and pressing on the forward pedal. Any ideas? Thanks! View more questions Search
|