Ask Experts Questions for FREE Help !
Ask
    junioro's Avatar
    junioro Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 3, 2009, 02:08 PM
    Need heat on first level
    I have a problem on my furnace. My first level won't heat. Was told it was the power head change power head and still have the problem. Change thermstat and still have the same problem. My second level I have no problem when I ask for heat.What could it be?
    medic-dan's Avatar
    medic-dan Posts: 321, Reputation: 23
    Full Member
    		  
    #2

    Oct 3, 2009, 02:44 PM

    When you say furnace you imply hot air. Power head tells me you're zoning the system which is not really typical of hot air.

    Is this a boiler? If it is, make sure that there is no air in the system by opening the bleed valves at each radiator until you get a solid stream.

    If it is hot air, is the burner coming on and the blower running?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat never gets to reasonable level [ 2 Answers ]

I have electric forced air heating. When the weather is cold (32 degrees F or below) my thermostat will not reach 70 degrees. I have the heat set on emergency heat and recently insulated my entire basement. In fact, when it is extremely cold I have to use a wood stove just to get the temp in my...

Ink level on printers lost ink level option [ 1 Answers ]

I have a HP Deskjet 950C and HP Phttosmart 7550 printer. Both printers have lost the option to see the ink levels. Is there a way to get this option back.

Nice on main level, hot on upper level [ 4 Answers ]

We live in a house that is 5 yrs old. With the A/C on, the main level of the house is very comfortable yet the upper level where the bedrooms are doesn't seem to cool down at all. I'm thinking that it has something to do with the duct work which won't be an easy fix. Could there be any other...

How to plug leaking oil heat copper lines at floor level [ 1 Answers ]

Copper supply and return lines (1/2" copper) remain from a removed oil heater. The 3' lines are cracked at the concrete floor level and weep oil when moved. What is the best way to seal these lines at floor level? I have thought of using a wooden or metal plug, solder or epoxy. Since the lines...

View more questions Search